| 3.2.5. |
[DEL] |
a2c0 |
| 3.2.5. | If the results of at least two of the three operations described in paragraph 3.2.4. above do not satisfy the requirements of paragraph 3.2.2. above, or if the verification cannot take place because the vehicle manufacturer has failed to supply information regarding the position of the "R" point or regarding the design torso angle, the centroid of the three measured points or the average of the three measured angle shall be used and be regarded as applicable in all cases where the "R" point or the design torso angle is referred to in this Regulation. | a0c0 |