| 4.7.7. |
In the case where the lamp, at the discretion of the applicant, also has to be
approved with LED substitute light source(s), all measurements, photometric
and colorimetric, shall be repeated using the LED substitute light source(s)
prescribed.
|
a1c0 |
| 4.7.7. |
In the case where the lamp, at the discretion of the applicant, also has to be
approved with LED substitute light source(s), all measurements, photometric
and colorimetric, shall be repeated using the LED substitute light source(s)
prescribed.
|
a1c0 |
| 4.7.6. |
In the case of a category S3 or S4 stop lamp, which is intended to be mounted inside the vehicle a sample plate or sample plates (in case of different possibilities) as supplied (see paragraph 3.1.2.8.) shall be positioned in front of the lamp to be tested, in the geometrical position(s) as described in the application drawing(s) (see paragraph 3.1.2.2.).
|
a0c0 |