Where n measurements are greater than 1, if required by paragraph 4.6. above, the measurement result shall be the average of the Cr values obtained for the n measurements, after the corrections described in paragraphs 6.2. and 6.3. above have been made. Following this method, final Cr results shall be expressed in N/kN and rounded to the first decimal place according to ISO 80000-1:2009, B.3, rule B.

 a3c0
Where n measurements are greater than 1, if required by paragraph 4.6. above, the measurement result shall be the average of the Cr values obtained for the n measurements, after the corrections described in paragraphs 6.2. and 6.3. above have been made. a0c0