3.2.1. One specimen of samples C or D is more than 20 per cent but the deviation of all specimens of these samples is not more than 30 per cent.
The manufacturer shall be requested again to bring their production in line with the requirements (alignment).
A second repeated sampling according to paragraph 4. below shall be carried out within two months' time after the notification. The samples C and D shall be retained by the Technical Service until the entire COP process is finished. 		a3c0
3.2.1. Following the sampling procedure shown in Figure 1 of this Annex the conformity of mass-produced special warning lamping shall be contested and the manufacturer requested to make his production meet the requirements (alignment) if the deviations of the measured values of the special warning lamps are: a0c0