2.2.2. However, if this value is more than 2 mrad but not more than 3 mrad (2 mrad < Δr ≤ 3 mrad) a further sample of a front fog lamp mounted on a test fixture representative of the correct installation on the vehicle shall be tested as described in paragraph 2.1. above after being subjected three consecutive times to the cycle as described below, in order to stabilise the position of the mechanical parts of the front fog lamp: a4c0
2.2.2. However, if this value is more than 2 mrad but not more than 3 mrad (2 mrad < ΔrI ≤ 3 mrad) a second front fog lamp shall be tested as described in paragraph 2.1. above This shall be done after the front fog lamp has been subjected to three consecutive cycles as described below, in order to stabilise the position of the mechanical parts of the front fog lamp that is mounted on a base representative of the correct installation on the vehicle: a0c0